TECHNICAL SPECIFICATIONS
CATEGORY: SPRAY MACHINE (rotor-stator SÜZER)
GRC / GFRC Spray Machine offers reliability for precast production facilities with standard and easy to use with the production capacity. A property owned by an integral part of your production line will increase your production capacity.
Approximately 100 kg / min capacity eruption
High-pressure spray guns that provide a much better adhesion and a uniform spray
The pump stops when the mortar used to prevent the flow of current to prevent gun Mortar System
Mechanical on-off, on-off functions such as vibration which allows to control the machine as per the go and working with 24V optional security cable to the Remote Control System
Mortar-pump and off you go on the gun per machine Spray Valve
Pneumatic Control System provides closure
Maintaining combustion engine which prevents overcurrent Motor Protection System
Used to prevent the deterioration of the external solid mixed into the mortar pump
Sieve removable Fees
Four large fiber coil may Tray
Transparent Reinforced Mortar Pipe for Security and Cleaning
Folding the drop-down telescopic arm for easy accessibility
The rotor-stator system and eliminates the existing corrosion problems encountered due to the low flow capacities.
For frequently experienced problems spiral cutting pin and change the result because no seal wear and seal bearing spiral is losing the interruption of production problems.
Mortar without any mechanical moving parts in contact are circulated. Therefore eliminates the problem of wear of the mechanical and metal parts.
Fees remain constant recirculation his mortar viscosity to the maximum level.
According to conventional rotor-stator system can pump normally 8-10 times higher fees. Fees earned chamber mechanical and technical controls and intervention is independent from the chassis of the machine is facilitated in every way.
Kullanılmaktadır.1 maximum efficiency in air "instead of 12 mm air hose is sufficient to feed the machine.
High-pressure spray gun which provides better adhesion and a homogeneous spray
The mortar system is used to prevent current flowing from the gun to avoid charges when the pump is stopped
Machine switching, vibration functions such as opening and closing as an option which allows to control the machine and go 24vil per employee wired remote control system for safety
With mortar spray gun, open the valve on the pump head of the machine go
Pneumatic control system that provides closure
Prevent combustion engine while maintaining the motor overcurrent protection system
Used to prevent the deterioration of the external solid mixed into the mortar pump
Removable fees sieve
You can take two coils wide fiber tray (no need to install over-fiber coil)
Reinforced transparent pipe for security and cleaning fees
It opens telescopic folding handle for easy access tivity
Hour meter convenience.
The presence of single system parts can be changed and when the change to 1 year exceed the feature has come to the fore.
High-pressure spray along with very good adhesion and uniform.
Mortar trolley has support for 220-volt outlet socket on board.
According to the rotor-stator system failure risk it is close to zero.
Due to the suction and discharge feature with a pressurized flow conditions are self cleaning feature.
It is capable of pumping low viscosity solutions.
Fibre trimmer has self-lubricating ability of the gun.
Instead kW 2.2 kW to 5.5 kW engine power compared to its competitors as preferred by capacity 100% increase in efficiency is achieved.
Spraying capacity 0-100kg / min stands out.
To pump solid particles up to 4mm capability.
Applied to transfer fiber mortar premix dump feature for convenience.
9 mt 70mt in vertical and horizontal mortar pumps has ability.
The bypass feature allows the long waiting time to apply mortar to the maximum level viscosity feature
Optional telescopic arm with double production with the help of the system coupled with two machine guns on two gun exit directly into the doubles.
Fees earned for the results of vibration chamber is independent of the mechanical part and the chassis is completely mortar can flow into the boiler on screen. A trowel or spatula to ensure the flow of personnel down the mortar sieve engaged in other systems. This system eliminates the assistance of personnel.
TECHNICAL SPECIFICATIONS