TECHNICAL SPECIFICATIONS
CATEGORY: SIMPLE AND COMPLETE BENDING TESTER
- Device GRC / GFRC specimens such as beams and precast concrete products are used in the bending test.
- The device's navigation system, power is digitally controlled servo valve load and deformation.
- The lower and upper supports can be changed relative to the structure and test samples 3 and 4 point adjustable distance between them.
- Thanks to the speed control system of the device is automatically loaded by the installation of devices in the standard rate and the device automatically tests are finished.
4-point support can be adjusted in accordance with the test opening between 135 and 250 mm.
- Load measurement is performed on the load cell body, loading accuracy class 0.5 of EN ISO 7500-1 according to TS.
- Measurement accuracy of 0.01 KN.
- Upload speed 0,01KN / h to 100 kN / s can be adjusted.
- 6 KN is the loading capacity of the testing machine can be manufactured in any desired load capacity.
- By integrating towing apparatus on the device, pull tests are carried out.
- Load correction can be reset before starting the test.
- Piston long as security is limited by safety switch.
- Advanced calculation function can be selected with different sample sizes and tests have been performed on selected samples sizes.
- At the end of the test results can easily be read automatically via a computer with the software interface.
- LOP of GRC products according to international standards, MOR values can be calculated automatically.
- Test results can be printed as a report can be saved on the computer.
- There is no limit on the test results can be stored.
- The operating voltage of 380 V AC three-phase devices.
-
- Dimensions: 820 x
